* Manufacturer reserves the right to make changes in design, materials and assembly of its products without prior notice

Классический Vest with a ventilated mesh-backed, leather straps for mounting PALS pouches

• The basis of durable synthetic mesh for ventilation
  
  
• The vest fastens with a zipper reinforced tractor with a long braid of oven mitts. Lightning reliability duplicated three fasteksy Duraflex®, do not overlap adjacent cells PALS. Fasteksy slings can be adjusted in length
  
  
• On the lower edge of the vest located removable belt loops (6 pcs.) for fixing the unloading / pistol belts. In itself vest sewn compact odnoschelevye buckle Duraflex® - so no extra belt loops without interfering elements. Loops made from a piece of double-slit lines with sewn buckle Duraflex®, this is achieved by high reliability (no breakage and freezing Button and dirty and worn out Velcro) and setting up a belt of any width and thickness. The correct way to install belt loops shown in the photos in the directory
  
  
• the sewing lines PALS reinforced vertical braid, sewed on the wrong side of the grid. Thus, the load is removed from the screen and provides a very high strength
  
  
• On the second breast mesh inner layer forms pockets for cards, the entrance to the long vertical zippers (twisted, large type), manners of paracord - do not rattle, do not break
  
  
• On the back of the second inner layer forms a mesh pocket under the hydrator (with a capacity of not more than 2 liters, hydrator not included). Log on, fastens with Velcro. Suspension hydrator on loops of Velcro, designed for the production of alloys and hydrator Source®
  
  
• Adjust the size of the vest is located on the sides back (minimum size - 48), made with the help of slings and buckles trehschelevyh Duraflex®, you can adjust the size directly to put on the vest. On each side of the four lines, which are a continuation of the series PALS (if necessary, they can be used for hanging pouches). Slings have slack - the excess can be trimmed at the ends of lines is required oplavit! To secure the spare and protect the ends of the sling from slipping on each sling wearing a further double-slit buckle Duraflex® (can be removed)
  
  
• The front of the shoulder vest is a sandwich of fabric Cordura® 500d (lining), 4 mm foam (for damping the recoil when firing) and heavy-duty material Hypalon (analogue tissue Sordura® 1060d, laminated on both sides with artificial rubber), anti-slip Butt. Front sewn slings PALS, made of lace, trimmed with a layer of material Hypalon
  
  
• The vest is designed for any growth. Adjusting the growth produced by combining back and front of the shoulder and the wide Velcro straps, threaded in sewn on the back of double-slotted buckle Duraflex®. These slings and their free ends are placed in a special cell, hidden under the Velcro adjustment on the back. Because of this there is no danger of the sling engaging obstacles increased reliability of the connection (even a total failure of Velcro). More use of special cells shown in the photographs in the catalog. Lining the dorsal part of the shoulder is made of the volume mesh Airmesh Coolmax®
  
  
• At the top of the back loop sewn evacuation
  
  
• The vest sewn only in monochrome colors
  
  
  
  

  
  
  
  
  

  REVIEWS:
  
  

  
  
  
  • Forum Discussion